#217

Hello
I have an Airlink 2 which was updated to noahlink when I bought it secondhand and worked perfectly with Target 7.1.
I now have Target 7.3 and it can’t find the Airlink2.
Do I need to update the Airlink? If so, how do I do that?

Any suggestions gratefully received.
Thanks
Dawn

#218

A (readily available firmware update) will cause GN ReSound’s proprietary Airlink 2 device to become an industry standard Noahlink Wireless device.

Here’s an excerpt from a DIY School PDF file named (04 Noahlink Wireless - Instructions For Use);

c2
c21012×889 267 KB

image
image931×811 169 KB

#220

This is likely the root of your problem. If you don’t have too much invested in customization on your new PC, then a Windows Reset would fix it. But you would be restarting at the beginning with a new fresh Windows and losing all of your previous settings.

c3
c31333×535 63.3 KB

Uninstall Target and then Re-Install Target might work.

ETA: There is also an option to export your setting first. And then you could import them back into Target after re-installing. So maybe export/uninstall/reinstall/import;

c4
c4766×456 29.4 KB

#221

It’s already had the update, if it worked on 7.1 then it’ll work on 7.3, I use Airlink2 and have no issues on 7.3, as @pvc says it’s going to be your new PC, a simple uninstall and install of target, windows does it driver “thing” at this time so maybe it’s this.

#222

the problem seems to have been that the driver fir airlink was not installed automatically so i went to the website and downloaded it and now it connects. thanks everyone

#223

Hello all, I’ve just got some second hand Phonak Marvel M50 and would appreciate a link to the Target software if anyone has this. Thanks in advance.

1 Like
#224

Just got a new computer so I’m looking for the latest Target software and would appreciate any help via PM. Thanks

#225

Sure, don’t forget you’ll need the correct programming device as well.

#226

May you send me the link for the phonak target software, please. I need it to for my phonak nathos w and phonak nathos UP w hearing aids please. Is a code needed. Many thanks

#227

Sure, but don’t forget you’ll need the correct programming device as well.

#228

You need the iPFG software for these which is very old and available on the Phonak website.

You also need an unlock code but we don’t have that for the much older Nathos.

You would also need the first generation iCube and NOT the iCube II.

Your Nathos UP W are the old Core Generation Phonak Naida V UP which came out in 2008.

@tenkan

#229

Hi tenkan,
I have noahlink wireless and phonak Audeo marvel m90r that i need to reprogram but I need the Target software can you help me please
thanks
dennis

#230

Sure, but you should have a read of the target software before jumping in.

https://www.phonakpro.com/us/en/support/other-support/target-fitting-software/overview-target.html

#231

Hi, could I also get the link for Phonak Target also? I have a noahlink wireless on the way ready to go.
Thanks!

#232

Sure, great you have your Noahlink wireless on the way.

Check out the target user guide as well.

https://www.phonakpro.com/us/en/support/other-support/target-fitting-software/overview-target.html

#233

Hey can you send it to me as well, I have the Noahlink wireless on the way as well, thanks

#234

Sure, check out the target user guide as well.

#235

Can you send me the link as well. I have ordered the Noahlink. Thanks!

#236

Welcome to the forum, great you have your NW already, don’t forget to check out the target user guide as well.

https://www.phonak.com/en-us/site-search?q=Phonak+Target+step-by-step+guide+

#237

Sorry for the delay answering for some personal reasons I have been away.
I got the software from the Pirate Bay as a torrent about nine months ago, it was version 5.4, I believe that I no longer have but the one installed on my PC has been updating to version 8.3 now, but the downloaded 8.3 cannot be installed on another PC, is asking for a serial number.
Anybody has one?
Regards