Да это производитель Oticon
Но то что написано на сайте
я несколько раз пробовал
Продовец с Кореии написал
мне что надо поставить новую
Genie ( у меня установлена
Genie 2 2017.2 SP1 )
Вы подключили OPN 2, правильно?
You connected OPN 2, right?
Genie2 = “C:\Program Files (x86)\Oticon\Genie\Genie2\Genie.exe”
Genie = “C:\Program Files (x86)\Oticon\Genie\Genie\StandAloneShell.exe”
OPN 2
подключаю так:
Запускаю Genie2 = “C:\Programm Files(x86)\Oticon\Genie\Genie2\Genie.exe”
Подключаю NoahLink Wireless к ноутбуку ASUS
Preferences\Edite preferences…\Programming device\DETECT\OK
Выключаю Wi-Fi и Bluetooth на ноутбуке и на телефоне iPhone
Открываю свои левый и правый OPN2
Вставляю новые батареи 312
Закрываю левый и правый OPN2
Распологаю примерно на растоянии 30см. от NoahLink Wireless
Выбираю клиента
FAMILY\DETECT
Пробовал очень много раз
Купил NoahLink Wireless у этого продавца ( он со мной на связи )
Есть ли ещё варианты
Спасибо
Возможно, обновление прошивки до версии v5 с использованием Hi-Pro и кабелей, поскольку обновления прошивки Oticon Opn не могут выполняться беспроводным способом.
It is possible to upgrade the firmware to version v5 using Hi-Pro and cables, since Oticon Opn firmware updates can not be performed wirelessly.
Link.
Is your Audi able to connect with Noahlink Wireless?
My Audi refuses to help me
Says try it yourself
These are the only two (@rvjuok @sergo29101967) that I have heard of not connecting with Noahlink Wireless. Both Russia?? But I don’t see what that has to do with this connection problem?
Genie 2 may have a Pin Code Lock in Genie2 / Preferences / Edit preferences / Data protection. But I don’t think that is the case for this connection problem? Even with a pin code lock I still think that you can Detect the hearing aids.
And maybe it’s problemma?
Or the fact that I did not register my Genie?
Or maybe I need to establish a NOAH?
We have never used NOAH. We always run Standalone.
We have never needed NOAH. We always run Standalone.
We have never registered Genie or Genie 2.
Hmmmm; the installation code supplied by Oticon looks suspicious? And it says Note that this action cannot be cancelled.
I already think that my NoanLink is spoiled
No, I don’t think that it is the installation code supplied by Oticon.
Genie 2 Help says;
Add or remove instruments: Add instruments that are not available in your market. This requires a code; please contact your local support.
Local support will deny me
in granting access
Very sorry.
Thank you for attention.
I’ll be selling NoanLink.
In the future I will acquire Hi-Pro.
I hope with a cable I will not have problems?
I’m quite sure you don’t need to use any codes to make it work even if you’re in Russia.
Open and close Battery Doors, right? Then Detect.
Открывайте и закрывайте дверцы батарей, верно? Затем Обнаружите.
Yes, I think you are correct.
There must be a subtlety in the sequence:
We open and immediately close (one or two values do not, I think so)
then found in the upper left corner.
I located my OPN2 at different distances (from 0cm to 3meters)
I changed the batteries.
I tried on Windows 8 and Windows 10.
Tried on different computers.
I changed the USB cable.
It seems that he is spoiled.
Although the seller is worthy
@pvc
should it be any sound from opns when they are waiting for pairing?
some instructions said if you have problems
Check that:
The mute function is not selected
Batteries are new
The wax filter or dome are not blocked
So my question is why wax or domes are matter for connection?