I’m running ITC Own’s 1, i have encountered few problems but mostly regarding my connectclip.
You may or may not be able to use wireless fitting (Noahlink Wireless) for Oticon Own ITCs. It depends on your other build choices. For example, an ITC build with Telecoil does not leave enough room for wireless fitting so you may need to use Hi Pro, CS44 cables, and Flexstrips.
1 Like
Can someone help me find a copy of Oticon Genie 2 software for a More 1. I have a hearing aid for only one ear and I need to DIY to better match good ear. I cannot convince my hearing aid specialist to help.
Thanks.
Hi there, sure but don’t forget you’ll need the Noahlink wireless programming device as well for DIY projects.
Check out the user guides as well.
I have a new pair of Rexton Bi-Core on order from Costco.
Can someone send me the link for Rexton Connexx 9.7.0/RexFit9.7.0 (or latest) for Newer/Current
much thanks.
Welcome to the forum sure but don’t forget you’ll need the Noahlink wireless programming device as well for DIY projects.
Have you checked the DIY school for a lot more information.
Hi. I just got Signia Insio 3NX hearing aids and need to tweak the settings. The Novalink arrived.
Please send a link to * Connexx9.8.0/SiFit9.9.0 or later.
I have old Siemens Pure 701s and a disk with Connexx 6.5 and cables.
Anyone need 6.5?
Hi there, sure but only the ITE can use the Noahlink wireless, you probably already know that CIC will need connexxAir or HiPro cables+ flex connecters.
Yikes, another Noahlink Wireless ordered by mistake? Sorry, but your recently arrived Noahlink Wireless is the wrong hearing aid programming device. I’m curious to know if posts like the above (don’t forget you’ll need the Noahlink wireless programming device as well for DIY projects) has influenced your decision to buy the wrong device?
You see, that post was technically correct. But only for the one member’s specific type of hearing aid. It was not meant to provide advice for future members with a different style hearing aid.
Going forward, here’s a link to → How to read DIY School PDF files
Suggested DIY School help files;
- 02 How to Program Your Hearing Aids
- Choose Hardware-Programming Device for Signia
and here’s a clip from (Choose Hardware-Programming Device for Signia) so you can find the correct hearing aid programming device. Tip: you can click the image below to enlarge:
I just ordered the GN AirLink 2 for my Widex Moments, and will be updating it per the Update Guide for Airlink 2.
Could someone kindly share a Widex Compass GPS software download link?
Thanks!
Hi there, sure no problem, hope you enjoy your DIY project.
I just bought one - Airlink 2.
Thank you everyone for sharing information! My HAs are Phonak L50. I’m reading the DIY School PDFs and I know I will need the Noahlink wireless hardware. Can I get a link to download the current version of Target software please?
1 Like
Hi,
can somebody please send me the latest possible version of the Phonak Target Sofware?
I know my audi has been using version 8.1.
Thanks a lot!
1 Like
I am also looking for the latest version of Target, thanks.
1 Like
I just received my AirLink 2 and have updated it. Could someone send a Widex Compass GPS software download link? Looking for v4.4. Thank you.
Hi,
I just got Oticon Real during spring break and was the only time I was able to go to Audiologist. My left hearing aid needs adjustment and I don’t have time to go since it’s 30+ miles away and never make it on time. I’ve reading about Genie 2. Could I get a copy of the software?
Here’s a link to → How to read DIY School PDF files
Suggested DIY School help files;
- 02 How to Program Your Hearing Aids
- Choose Hardware-Programming Device for Oticon
- Fitting Instructions Oticon Genie2; Real-More-Own
- Noahlink Wireless - Instructions For Use
1 Like
I am a user of Amplifon branded Phonak P90 hearing aids, I downloaded and installed with your help Phonak Target I connected Noahlink Wireless which sees my hearing aids but does not connect because it says they are blocked, I read that I should change the installation key in Phonak Target setup but I don’t know the installation key for Amplifon, could you tell me what is the installation key for Amplifon in Phonak Target or any other way to unlock my hearing aids?
I don’t know of anyone who has un unlock code for a Amplifon/rebranded Phonak?
Is it possible for you to ask/demand that your seller provide the code?