What do I need to do to cancel this out please ? Totally new to diy but making progress.
Starkey Livio 2400
Thanks
What do I need to do to cancel this out please ? Totally new to diy but making progress.
Starkey Livio 2400
Thanks
Would reducing wind help ?
you want to reduce wind/air noise?
Set Wind to position 3 or 4 to soften (turn down) wind noise.
If you switch Wind to Off to disable wind management.
Postition setting showing you the noise reduction in dB.
For Wind position 2 the wind noise will be reduced up to 15 dB.
You can try position 3 or 4 to maximize wind noise reduction !
Ok so the lower numbers (1 and 2) increase the wind ? Sorry but Iām having trouble getting my head around this bit .
Thanks for the response
Yes, the lower numbers (1 and 2) increase the wind/air noise.
OFF = no removal / no damping of wind noise.
1= only very low wind noise attenuation
2= a slight better wind noise damping
3= better wind noise attenuation than in position 2
4= maximal wind noise attenuation
Thank you firenzel that is another part of the software learnt . I will start another topic for my next Question