Hello! I would like to use the Connexx RexFit to experiment with my Costco KS-7 aids. Can someone help me out with a software link? Thank you!
I think that you need Connexx 8 or later for the Costco Kirkland Signature 7/KS7’s, as opposed to Connexx6 for legacy models.
That would equate to Connexx 9.6.6 along with the RexFit 9.6.10 hearing instruments database as opposed to Connexx 6.5.5 along with the RexFit 6.8 hearing instruments database for Older/Legacy Rexton hearing aids.
1 Like
Got the link, thank you!
I have a Noahlink wireless that I used sucessfully to connect to a pair of new Philips 9030’s, but neither I nor the Costco tech could get them to work correctly, so I returned them and am back with my old aids. I’ll try the Connexx and the Noahlink and report back. Thank you!
It doesn’t work well when you guess 
hi ,have someone have Interton Appraise2.5 or Interton CompuFit4.4 ?thanks in advance
Yes let us know how you get on, @MDB I believe has quite a bit of experience with programming those older KS7, if you ask I’m sure he’ll help you along if you need.
Now that you have the Connexx software you’ll be able to run a client in simulation mode, this way you can get quite a bit of information on what and how to do things, as it’s always good to get some inspiration from those who have actually used the model you intend to use
Good luck.
Hey guys,
Really new to the forum, stumbled upon here while trying to get some help. Not sure if this is the proper thread but hoping someone can help me out or point me to the right direction/forum.
Can anyone here help me out with 3D Scanning. I have a siemens Iscan that stopped working, by stopped working, I mean the software cannot detect it properly. The device can be recognized by device manager in Windows, the serial number, firmware version can also be detected by the iScan software but it also states that “No hardware is connected”.
Any luck helping me out? Can this be a hardware issue?
Interesting, we deal with hearing aids and hardware on this forum, unlikely to find an answer here.
Maybe you could find out more here.
Than you for your reply, thought it was possible to find something here since it’s for making hearing aids. 
thanks tho!
I’m interested, tell us more about what your doing…
Maybe review an AudiologyOnline course named;
Quick Tips: iScan Set-up | Course# 26529 - AudiologyOnline
You may have to Register. But it’s free as long as you don’t need to earn education credit.
Some screen grabs:
need a download link for conexx 9 pls
Sure, don’t forget the correct programming device for your HAs.
Hello guys, can someone send the older Oticon genie software? Thank you for your help
Sure, don’t forget you’ll need the correct programming device.
Thanks a lot to everyone, what about Unitron Max, what kind of software would you need for it?
Unitron TrueFit 5.2.
I thought it was much older then that, like ufit as they are 2012.