Phonak Target 8.02 software- downloaded, how to install?

I believe a right click to unzip it, and then you’ll be able to install.

1 Like

I’m new to this DIY stuff, just installed Target 8 with no hassles. Assuming you have a Windows PC you can do the same:

Unzip first as tenkan said. Just right-click on the zip file and choose “Extract all”

Among the unzipped files look for setup.exe and double-click it.
That starts your installation.

1 Like

Thank you for reply.
When I right click the file, it “opens up”, but there is no “setup.exe”

Thanks for reply.
Your directions are good, however, for some reason there is no “setup.exe”
there is; setup.dll; setup.ins; setup.inx; and plain old “setup”.
On one of my trys I did get a box with “PFG 8.6c” on my desktop. Is that what you have?

Something is not right, check your PM

Here’s a link to → How to read DIY School PDF files

Suggested DIY School help files;

  • 02 How to Program Your Hearing Aids
  • Choose Hardware-Programming Device for Phonak
  • Fitting Instructions Phonak Target
  • Noahlink Wireless - DIY User Guide

If you started with Phonak Target then I think you should be seeing the same files as I did.

1 Like

where can i download the software? is it free?

1 Like

Hello @Michau Michau, please check your private messages

1 Like

after the download of " Phonak Target "finished,
→ right klick on that file, and choose “extract all…”
Then you get an additional folder “Phonak Target 8.1.0” at the same place where the Phonak Target file is located.

Open the folder “Phonak Target 8.1.0” and double klick on “Setup.exe” Application

Hello :slight_smile: Can you send me such a PM as well? That would be very kind.

Welcome @user670, please check your private messages.

1 Like

Hello, I am from Germany and new here. I am happy I found this forum with lots of information and helpful content. I wear Phonak Lumity hearing aids and have already ordered a Noahlink Wireless.
Can someone send me a PM for the latest Target SW? That would be very kind. :grinning:

Welcome to the forum sure but you should read up on the user guide as well before jumping in, really helpful for setting up the first fit.

Thank you for your kind support. The Target Version I received is 8.0.2. Does it work with Phonak Lumity?
Isn’t 8.1xx available for download?
Appreciate the support I am getting here :smiley:

Hi there, install target to find out if the Lumley are available, if not just use the built-in updater to get the latest version if needed.


1 Like

Hello, would you send me a DM too? I would be very grateful . :smiley:

Hi @user700 , please check your PM

1 Like

Hi, anyone have the phonak software? really need it… thank you!

1 Like

Hi again, seems you have asked multiple times in different posts, you could delete thisone since it’s already been answered for you ; )

1 Like