Noahlink wireless

hearing-aids
#99

Maybe he needs to return his computer to the state it was before he installed Genie and then install Genie and not do any codes.
I’m just throwing out ideas. You say you’re fresh out so why not.

0 Likes

#101

0 Likes

#102

pvc: I don’t have Genie. I don’t have Oticon’s. I don’t have a NoahLink Wireless. I’m just throwing out ideas where you seem to be fresh out.

0 Likes

#103

From the other thread;
How to get out of Flight Mode (all wireless operation is disabled):

  1. Open and close battery door
  2. Wait 10 seconds before wireless operation is resumed, then try Detect
  3. Wait 15 seconds before opening battery door to avoid resume flight mode
0 Likes

#104

I repeated the following:
1.Open and close battery door
2.Wait 10 seconds before wireless operation is resumed, then try Detect
3.Wait 15 seconds before opening battery door to avoid resume flight mode
And it did not help.
Do you have an official Genie2?
And when installing Genie 2, which region is better to put?
Thank you all for your attention!

0 Likes

#105

This is what we use, Scroll down to Oticon Genie + Genie 2 - 2017.2
How to find Fitting Software to Program Your Hearing Aids [DIY]

For region, I use US / USA;
Capture

0 Likes

#106

Thank you!
Tomorrow I will put your version.

0 Likes

#107

Put today vashchu version of Genie2.
But unfortunately it did not help either.
If I get to connect
I will certainly inform you.
Yes, a little nezabyval.
C can I connect without Genie2
TV Adapter 3.0?
And where can I get it?
Many thanks to all for your advice.

0 Likes

#108

Yes and no. You can connect TV Adapter 3.0 without Genie 2.
But if you need extra/fine tuning volume adjustments then you need Genie 2.
image

See Oticon Opn Phone/TV Adapter/ConnectClip sound settings for quality/bass/mic
We got ours used from EBay.

0 Likes

#109

Dear moderators.
Will I be able to connect my OPN2
with the help of Hi-Pro USB
or with another wire programmer.
NoahLink Wireless I want to send back
NoahLink Wireless or faulty
or in some way blocked
my Audi
Thank you for attention!

0 Likes

#110

If you’re interested in spending less then the minipro works the same. Someone else can answer if the OPN2 works with the hipro/minipro.

0 Likes

#111

Moderators don’t know much about DIY.

Since we don’t know why Noahlink Wireless can’t connect, we don’t know if a Hi Pro will connect? If Opn2 is somehow blocked, it may be blocked for Hi Pro.

0 Likes

#113

On my OPN2 installed the latest firmware 5.0

0 Likes

#114

Thanks for the advice and advice. I personally ask for help. I was just tortured to run to the specialists. And no use whatsoever. I have long ago lost my hearing. And it’s very hard for me to perceive the outside world. You have to learn the world from scratch. Very much I need your opinion and advice. Thank you for understanding.

1 Like

#119

1.My Genie 2 does not recognize hearing aids.
2.My Genie 2 does not connect to hearing aids.

0 Likes

#120

telecare you need signia membership numer that you do not have it will be only with signia partners ie audiologiest they now started to use validation protocol to discorage DIY. seems they present on forums

0 Likes

#121

Signia TeleCare is not meant replace the Connexx fitting software. It’s just remote fitting changes is all. It has nothing to do with DIY or DIYers. We still can use Connexx.

You don’t believe me, do you? See TeleCare Handbook Page-41.

0 Likes

#122

my question is not replacement of connexx but they require account with signia that given to professionals only.

0 Likes

#123

For TeleCare Yes. Just don’t use TeleCare. Use Connexx.

1 Like

#124

https://www.thehearingclub.com/NoahLink-Wireless-Hearing-Aid-Programmer-with-software_p_364.html

Only $295 new from a reputable company

0 Likes