I use 312 zinc batteries from Costco. I want to remove all of them from the childproof packaging at once (no kids or pets here) and store them in a pill bottle with the stickers still attached. The sticker’s purpose is to cover vent holes on the battery, but do they also completely cover one of the contacts? Can loose batteries with the stickers on make contact and drain their charge?
1 Like
Yes. However, if you can keep them from touching by using one a cheap battery carrier like the ones that Amazon sells, you will be fine.
You can also use one of the daily pill carriers and place one battery in each compartment. The key is to not let the batteries touch.
1 Like
I understand exactly why it seems like a good idea but I think you will find that you have mostly weakened or dead batteries. The tab is affixed to the large contact. So it fails to totally cover and insulate that side and all around the circumference which is the same side. That body will shirt out another battery between the side and its small contact. The tab grab tails will tend to jam up your organization.
If you went to the trouble of finding just the right sized clear stiff low friction non conductive tube and also could slice or snip the tails off just along the battery body, and lined them up all the same way - then yes I had thought of creating a better dispenser. But then you would have to use your nail to pry off the label.
I speak with experience having done both electrical work and electronics and it is not worth bothering.
You cannot keep more than one battery in a container compartment unless they are as described above lined up and unable to move!
I googled and found the following instructions… is that helpful?
If you’re having trouble opening the packaging for your hearing aid batteries, especially the new, more secure packaging, you might need to use a pair of scissors to carefully cut and access the batteries.
Here’s a more detailed breakdown:
- New Packaging Security:
Due to safety regulations (like Reese’s Law), hearing aid battery packaging is now designed to be more secure, making it harder for children and pets to access the batteries.
- Opening the Package:
Instead of a simple pull tab, you’ll likely need to use scissors to cut the packaging and access the batteries.
-
How to Cut:
- Find the Seam: Locate the seam or weak point in the packaging where the batteries are sealed.
- Carefully Cut: Use scissors to carefully cut along the seam, working your way around the package to open it.
- Access the Batteries: Once the packaging is open, you can safely remove the batteries.
-
Tips for a Smooth Process:
- Sit Down: Ensure you’re sitting down and have a stable surface to work on.
- Use Sharp Scissors: Sharp scissors will make cutting the packaging easier and safer.
- Be Patient: Take your time and be patient as you cut the packaging, and you’ll be able to access your batteries without any issues.