Differences between NAL-NL2 and Adaptive Phonak Digital

I’m curious what factors you consider when deciding between DSL and NAL? Are there certain types of audiogram that you consider more suitable for one or the other, or is it more based on personality, or ? Thanks.

Hey, thanks @Sierra for that venture into foreign territory! FWIW here’s the same (almost) with the current fitting of my four-year-old V90 HAs. This fitting was done in October when I got a custom mold in the left ear, leaving the right with the original open dome. Strangely(?), when I load the fitting from the HAs, the Instruments::Acoustic Parameters page still shows open domes in both ears. If I change it there to the cShell I have in the left, it wants to do a recalculation and another Feedback & Real Ear test. Since this is just a record of my audi’s fitting as it comes from the HAs in case I need to restore from it in future, I haven’t saved that. Changing to custom mold and doing the recalc changes the left ear curves some, but not above 4K.

Mine has Gain Level of 90% (for the gradual adaptation feature), which it’s been forever. I asked my current audi about that and he said he doesn’t use that to change more-or-less overall gain – he ignores it – and does something else instead. (I’ve had several audis due to moving from place to place.)

Not sure why we have different line schemes – I have no dashed lines. But my lines are as follows, starting from the bottom and all at 8k, right ear:
dark red: Gain (80 dB speech)
dark red: Gain (65 dB speech)
dark red: Gain (50 dB speech)
magenta: Feedback threshold
light red: Target gain (80 dB speech)
light red: Target gain (65 dB speech)
light red: Target gain (50 dB speech)
grey: Gain limit

Yes, it defaults to compression (for my audiogram, anyway) but I don’t have SoundRecover turned on. I notice that my diagrams don’t show compression on the right as do yours. I don’t know the function of “Prescribed compression” for this diagram (the alternatives are Linear and Semi linear).

You might be using a somewhat out-of-date audiogram for me. I updated it here within the past few days with my Aug. 2019 one.

Meanwhile, the Post Office says my Noahlink Wireless should be delivered in the next hour or so, and then a bit after that I’m off to Costco to trial (for up to six months) a pair of KS9s. When I get home with those I should be able to see these diagrams for those. I’m curious to see whether the HIS will want to fit with my left-ear custom dome – I assume it’s plug compatible, but I’m not positive. Or maybe without first, and then with.

What power of a receiver are you using? The gain limits seem low. I believe the software picked Medium and that is what my graphs are based on.

I believe the Compression box at the bottom refers to gain compression, not frequency compression. If you change it to linear it should just scrunch the soft, normal, and loud lines together.

For the audiogram, I just used the one that pops up when I click on your avatar.

It appears your gains are being significantly attenuated to avoid feedback, even in the left ear.

My receivers are S/Standard. The alternatives are P/Power and SP/SuperPowerplus.
I updated the audiogram that pops up since you first used one, in case you saved that one. I’ll be getting a new one today.

There should be a M or Medium between the S and the P power receivers. I think the S receiver may be a little underpowered for your loss.

1 Like

Learned today at Costco that receiver designations changed after my V90s. For the V90s S is 46/114 (gain/MPO) then P and SP; now M90s have S 46/11, M 50/114, then P and UP. I’m not sure about KS9s; I mistakenly thought I could come home with them today, but they won’t be dispensed until two weeks from today after I paid for them today. Today I had an exam – new audiogram posted in my profile – and a quick fitting so I could try them for five minutes, but the nitty-gritty fitting including REM will be in two weeks. She didn’t think I need the custom mold I have. “No feedback walking around the store, right?” “Right.”

I updated the audiogram, but not really much of a change. Here is what I see with DSL v5. The graph is showing feedback potential starting at 6 kHz. With the Adaptive Phonak it seems to be worse for feedback. This is with power domes in both ears. One thing you have to watch with fitting is that I see a Feedback and Real Ear test tab. Can’t get into it because it needs the aids connected, but if it works like the Rexton Connexx it will cut back gain based on feedback it measures. So when the fitter says “No feedback walking around the store, right?”, it may be that the computer has already cut back gain to avoid feedback. So, no, you don’t get feedback, but you also do not get the prescribed gain.

Thanks, I’ll check out the Feedback and Real Ear issue when I go back. I suspect you’re right. What’s the solution? Skip the test, and then guesstimate what feedback suppression is needed – e.g., closed domes, custom molds?

I tried the different options and the power domes seem to give the best feedback protection in Target. In the Connexx software custom molds with 2.5 mm vents seem to improve things. Not familiar with this software so don’t know if there are any other options…

Thanks for taking the time to lay out some guidelines that integrate science, art, economics & ethics in practice. While I have no hearing loss provider training, some of these elements are present in being a good practitioner of any field. Dr. C’s instrument looks like a great organizer for a provider to make sure they have covered the variables. I’m unclear though how I as a beginning HA consumer would utilize the checklist to decide on a good provider, as it would seem that I would only know if they truly step through all that list with my care AFTER the fact. You & others on this great site stress that REM is non-negotiable & that one element is easy enough to ask up front (which I did when I first connected with COSTCO staff). I’m trying to imagine taking a copy of the multi-page checklist with me & asking them at first meeting - will you do all these steps with me? How would you suggest a consumer might use the checksheet to screen potential providers at the front end of the provider selection? Thanks in advance.

I’ve just changed from APD to NAL 2. Much clearer speech, I feel.

1 Like

I tried NAL-2, but didn’t think it provided about the same level of speech understanding as DSL, and I didn’t like the compression of NAL-2. I went back to DSL. I had earlier switched from APD to DSL.

Brec, please elaborate the differences in compression. Thx.

NAL-2 has more compression. That means the difference between the loudness outputs for the loudest and softest inputs is smaller. So softer inputs are, for me, amplified too much relative to louder inputs.

What compression ratios do you get with NAL NL2?
My KS9s, Costco’s version of Phonak M90, are fitted to NL2. The compression ratios are approximately in the range of 1.2 to 2.0.

For my M90-312s–

The compression ratios are the very bottom line, somewhat hard to read in gray “ink” – but they are “>3” at all frequencies above 1.5 kHz.

For comparison, here’s DSL:

Because these are output rather than gain curves, you can visually see the degree of compression by the closeness of the red or blue curves to each other.

1 Like

You can re-derive the CR by noting that the input curves are 15dB apart.

At 250Hz the output curves are 15db or 14dB apart so CR is 1.0 or 1.1.

At 4kHz, the NAL2 curves are: 50-65dB = 8dB; 65-80dB = 5dB. 50-80dB (30dB) is compressed to 13dB.

  • 50-65dB = 8dB , CR=1.9
  • 65-80dB = 5dB , CR = 3.0
  • 50-80dB = 13dB, CR = 2.3

This gradual rise of CR with level is useful and natural. In music studio dynamic control they say “soft knee” or “Over Easy®”.

I presume this is DSL v5 (for adults). Correct?

Correct!

And here are some more characters to keep the forum software happy.

2 Likes

Thank you so much for your post. I will try NAL-NL1 tonight :slight_smile: